Disable send a report to Microsoft feature

Anwar Shaik

Web Designer at Wildwoods Adventure Tourism Pvt Ltd.

Khairatabad,
Hyderabad,
India.   
Email : anwarbhashas@gmail.com

To disable the stupid feature in WinXP which tries to send a report to Microsoft every time a program crashes you will have to do this

-----------------------------------------------------------------------------
Open Control Panel

Click on Performance and Maintenance.

Click on System.

Then click on the Advanced tab

Click on the error reporting button on the bottom of the windows.

Select Disable error reporting.

Click OK

Click OK
-----------------------------------------------------------------------------

Digital Camera Guide

Anwar Shaik

Web Designer at Wildwoods Adventure Tourism Pvt Ltd.

Khairatabad,
Hyderabad,
India.   
Email : anwarbhashas@gmail.com

Digital Camera Guide

So, it's time for a digital camera huh? Well, buying one can be more than a little difficult. What types of features should you look for? Well, this guide will tell you that plus get you a little more familiar with what these cameras are capable of.

Megapixels

When it comes to megapixels, the more the better. I recommend a minimum of 2, but 3 or 4 is great. We did a test to see if a camera with 2.3 megapixels (actually 1.92 - 1600 x 1200) could produce a good quality 8x10.

Turns out it can, if you have the right paper and printer. We used HP Premium Plus photo paper with an HP 970 series printer and made a fantastic 8 x 10. Remember, I was a professional photographer before I got into computing, so I know a good print when I see it :-)

The resolution at 8x10 (we had to crop in to make the picture proportional to 8x10) was only 150 DPI. Most printers would not make a real good 8x10 at that resolution, but this one did. So, if you want to be sure you can get good 8 x 10s, you may want to go with a 3 megapixel camera or better (that gives you around 200 DPI at 8x10 size, still not quite the optimum 300 DPI, but it looks good with the right printer).

Optical vs Digital Zoom

You've probably noticed that most digital cameras have both a specification for digital and optical zoom. Pay the most attention to the optical zoom.

The optical zoom magnifies (zooms in) using glass. The digital zoom basically crops out the edge of the picture to make the subject appear closer, causing you to lose resolution or to get an interpolated resolution (i.e. the camera adds pixels). Neither of which help image quality.

Finally, make sure you get enough (optical) zoom. A 2x zoom isn't going to do much for you. A 3x is the average you'll find in most digital cameras will probably be good for most uses. More on lenses later.

Connection

How does the camera connect to your computer? If you have a USB port in your computer, you'll want a camera that can connect via USB as opposed to a slow serial connection.

On the other hand, if your computer doesn't have a USB port, is there a serial connector available for the camera you're looking at? If so, is it a special order and how long does it take to get it?

Storage

What does the camera use to store images with? If it uses a memory stick, make sure you consider buying additional sticks when you get your camera. A typical 8 meg memory stick that comes with a 2 megapixel camera only holds 5 or 6 images at the camera's best quality.

Some cameras use a 3.5 inch disk for storage. Be careful of these!

Although it may sound like a good idea, a 3 megapixel camera at high resolution produces a 1 meg file (compressed!). That's only 1 picture per disk.

Here's a few more things to look out for when trying to make your digital camera purchase.

Picture Formats

When you're trying to decide on which digital camera to get, check and see how many different picture formats it supports.

You want something that can produce both uncompressed (usually TIFF) and compressed (usually JPEG) images. I personally use the high quality JPEG setting on my camera for most of my shooting. TIFFs are just too big and the difference in quality is not ascertainable by mere mortals.

You also want to be able to shoot at a lower resolution than the camera's maximum. That way, If you're running short on memory, you can squeeze a few more shots on your memory stick.

Auxiliary Lens / Flash

This was a biggie for me. While a 3x zoom may work for the "average" user, I needed something that allowed me to do some wide angle work as well as have a good telephoto lens.

So, the camera I purchased a few months back was a Nikon Coolpix 990 (note that this isn't the only camera that can accept lenses). It has auxiliary lenses that screw into the filter ring on the front of the lens. I now have an ultra-wide fisheye lens plus a nice telephoto.

In addition to lenses, I wanted a good flash. The flash that is built into most of these cameras gives you a top range of 15-20 feet - at best. I wanted a camera that could take a powerful auxiliary flash (again, the Nikon isn't the only camera that fits this requirement, but I liked it better than the rest). If you need more reach than the small built in flash can deliver, then make sure you can attach an external flash to any camera you consider.

As an added bonus, if you get a camera that can take an external flash, you can place that flash on a bracket and eliminate red-eye.

Flash Distance

Speaking of flashes, make sure you check the distance the built in flash is good for. You don't want a camera with a wimpy flash that only travels a few feet (well, unless you can get an external flash for it as described above).

Battery Type

This may not sound important, but it is. Anyone who owns a digital camera can tell you they eat batteries the way a sumo wrestler eats at a buffet.

Make sure the camera can run on regular (or rechargeable) "AA" type batteries. You don't want a camera that eats through expensive lithium batteries every 10 shots or so.

One thing to remember about digital cameras, they do eat through batteries. I recommend getting some Nickel Metal Hydride rechargeable for it. I have some for mine and they have saved me a fortune.

Final Notes

Choosing a digital camera isn't easy. There's a huge selection out there and only you can determine which features you need.

For instance, if you shoot wildlife photos, a small 3x zoom probably isn't going to cut it (unless you can attach auxiliary lenses to it). If you shoot lots of close-ups, make sure the camera has some sort of macro capability. If you shoot big group photos indoors, an external flash may be necessary.

My advice is to make a list of things you want to be able to do with the camera then go to somewhere that can help you make a good purchase decision.

Finally, buy the BEST camera you can possibly afford. Or wait until the price drops on one with the type of features you want.

Converting to NTFS

Anwar Shaik

Web Designer at Wildwoods Adventure Tourism Pvt Ltd.

Khairatabad,
Hyderabad,
India.   
Email : anwarbhashas@gmail.com

Converting to NTFS

Your hard drive must be formatted with a file system such as FAT, FAT32 or NTFS so that Windows can be installed on to it. This system determines how files are named, organised and stored on the drive. If you’re not using it already, NTFS (New Technology File System) is recommended for Windows XP because of the additional functionality it offers. If your PC came with Windows XP pre-installed then there’s a chance that you’re already using NTFS. If you’ve upgraded from Windows 98 or Windows Me you may still be using FAT or FAT 32. The option to change over to NTFS would have been available during the upgrade process. Don’t worry if you skipped this as it’s possible to convert at any time from within Windows XP without losing any data.

The recommended option

There are a number of features in Windows XP that will only work if the NTFS file system is present, which is why it’s suggested you make use of it. File and folder permissions, encryption and privacy options are just some of those you’ll be able to access. In particular, those of you who have set up user accounts will find NTFS invaluable. For instance, if you continue to use FAT or FAT32 anyone with physical access to the drive will be able to access the files and folders that are stored there. However, with NTFS you’ll be able to use a level of encryption (Professional Edition only) that will enable you to protect your data.

You’ll also find NTFS more reliable in that it’s more able to recover from disk errors than its FAT or FAT32 counterparts. A log of all disk activity is kept so should a crash occur, Windows XP can use this information to repair the file system when your PC boots up again. To find out what file system you’re using, open My Computer, right-click your main hard drive and choose Properties. Take a look at the General tab to see confirmation of the file system that’s in use.

Convert now

You can use the convert tool in Windows XP to change the file system on your hard disk from FAT or FAT32 to NTFS. The whole process is safe and your existing data won’t be destroyed. To begin, click Start -> Run, type cmd and press [Return]. At the command prompt type convert c: /fs:ntfs and press [Return] (where ‘c’ is the letter of the drive you’re converting). When you try and run the convert utility, it’s likely that Windows XP will be using your paging file so the process won’t be completed immediately. Therefore, you’ll see a brief message on screen informing you that the conversion will take place instead the next time Windows starts up. Having restarted, the Check Disk utility will run, the conversion will be performed automatically and you may find that your PC will reboot twice more.

The benefits

With your drive now running NTFS, it’s time to take advantage of the new options that are available. Having created a number of different user accounts you can now control the level of access that’s granted to individual users. For example, there are going to be certain files and folders that you’ll want some users to be able to access but not others. If you have Windows XP Professional Edition you can do this immediately.

Right-click any file or folder, choose Properties and select the Security tab. A dialog will be displayed showing the names of all your users. Alongside will be two columns which enable you to select levels of access for each of them, the permissions include Full Control, Modify, Read and Write. You can then check the appropriate box to determine whether or not to Allow or Deny a particular permission. For Windows XP Home Edition users, the Security tab won’t be immediately available. To access this option you’ll need to restart your PC, pressing [F8] until a menu appears. Next select Safe Mode and wait for Windows XP to start up. You can then set your options in the same way.

Another feature is NTFS compression. It’s quick and seamless as your file or folder is decompressed automatically when you access it. (Don’t confuse this with a Zip compression utility where the files need to be extracted before they can be accessed.) Although you may have used NTFS compression on a file or folder, there’s no way of telling just by looking at it. 

To remedy this, open My Computer, click Tools -> Folder Options and select the View tab. Under Advanced settings, scroll down and check the option ‘Show encrypted or compressed NTFS files in color’, then click Apply and OK. Take a look at your compressed items in My Computer and you’ll see the text label has changed from black to blue. Something else that’s exclusive to Professional Edition users is the Encrypting File System (EFS). You can use this to protect your important data so that no one else can read it. Your encrypted files and folders will only be accessible when you have logged into your user account successfully.

How To Remove and Add Right Click Menu

Anwar Shaik

Web Designer at Wildwoods Adventure Tourism Pvt Ltd.

Khairatabad,
Hyderabad,
India.   
Email : anwarbhashas@gmail.com

How To Remove and Add Right Click Menu Items from Files and Folders

Removing Items

A lot of programs you install will add themselves to the right-click menu of your files and/or folders. And most times, you have no choice in the matter and, as a result, your right-click menu can get very long with added items you don't even use. The last person I was helping with this had a right context menu so long that the Rename option was no longer visible!

Fortunately, you can easily remove those unwanted menu items, if you know the registry values to edit. And it's not at all difficult once you know the keys responsible for the additions.

For Files, the secret lies in the "context menu handlers" under the shellex subkey for "All Files" which, in the registry, is nothing but an asterisk - like a dos wildcard, which means the values entered apply to all files. It is at the very top of the Root key, right here:

HKEY_CLASSES_ROOT\*\shellex\ContextMenuHandlers

Click the the + sign next to the ContextMenuHandlers key, to expand it.
Now you will see some of the programs that have added items to your right-click menu. Simply delete the program keys you don't want.

Yup! It's that simple. If deleting makes you uneasy, just export the key before deleting it. Or, instead of deleting the values, disable them. Simply double click the default value for the program on the right hand pane and rename the clsid value by placing a period or dash in front of it.
ie; - {b5eedee0-c06e-11cf-8c56-444553540000}

Then exit the registry, refresh, and right click a file to see if the item was removed from the menu.
Some programs - like WinZip or WinRar - will add several items to your right click menu but all of them will be removed by deleting or disabling their one context menu handler.

Note that the above key only applies to the right click menu of files.
To remove entries from the right click context menu of folders, you need to navigate to the Folder and Drive keys:

HKEY_CLASSES_ROOT\Folder\shellex\ContextMenuHandlers
HKEY_CLASSES_ROOT\Drive\shellex\ContextMenuHandlers

All you have to do is follow the same procedure as for Files - either disable or delete items you wish to remove.

Adding Items to the right click menu of Files and Folders is also fairly simple using the Registry. It just involves the creation of a few new keys for each item you wish to add. You edit the same keys used for removing items. Let's use Notepad as an example of an item you'd like to add to the right click menu of all your files or folders.

For folders, go to this key:

HKEY_CLASSES_ROOT\Folder

Click the + sign next to Folder and expand it so that the Shell key is visible. Right click the Shell key and choose New>Key and name the key Notepad or whatever else you'd prefer (whatever the key is named is what will appear in the right-click menu). Now right click the new key you made and create another key named Command. Then, in the right hand pane, double click "Default" and enter Notepad.exe as the value.
Exit the registry, refresh, and right click any folder. Notepad should now be on the context menu.


For files, go here again:

HKEY_CLASSES_ROOT\*
Expand the * key and see if a Shell key exists. If it does exist, follow the same procedure as for folders. If it does not exist, you'll have to create a new Shell first. Just right click the * key and choose New>Key and name it Shell. Then right click the Shell key and continue on the same way you did for adding items to the right click menu of folders.

Once done, Notepad should appear as an option in the right click menu of all your files.

Mobile Secret Codes

Anwar Shaik

Web Designer at Wildwoods Adventure Tourism Pvt Ltd.

Khairatabad,
Hyderabad,
India.   
Email : anwarbhashas@gmail.com

Secret Codes Of Nokia Mobiles

Below we present secret codes of nokia mobile phones which are very useful for people who unlock phones and for amateurs of this topic. These special key sequences entered fromkeyboard of phone allow you to get some important information like IMEI number, release date, software version and much more. You can also choose default language, activatenetmonitor ect.


1610/1630

*#170602112302# (software version)

1610/1611

IMEI number: -*# 0 6 #
Software version: -* # 1 7 0 6 0 2 1 1 2 3 9 2 #
Simlock status: - # 9 2 7 0 2 6 8 9 #


2110

*#9999# (software version)

2110i/2110e

*#170602112302# or (depends on model)*#682371158412125# (software version)


NOKIA3110

*#06# -IMEI

*#3110# -Software version

##002# - allows to turn off voice mail.

*#7780# - restore factory settings

*#746025625#(or *#sim0clock#) - to check if clock of sim (SIM-Clock) can be stopped (SIM-Clock-stop is akind of standby mode which saces battery)

*#92702689# (or *#war0anty#) -"warranty code:"- you have to enter one of the following codes:

6232 (OK)displays month and year of production date (ie "0198")

7332 (OK) - displays date of last repair - if there is (ie. "DATE NOT SAVED")

7832 (OK) - displays date of purchase - if there is (ie. "DATE NOT SAVED")

9268 (OK) -displays serial number

37832 (OK) -sets purchase date in format MMYY (MM - month, YY - year)- attention: you can set it only once, so beware !

87267 (OK)-displays message "Confirm Transfer?" - meaning is unknown (?)

* # 9 2 7 0 2 6 8 9 # -Simlock info

*#31# (call) -sets if your phone no. will be hidden or not (works only in some networks)

*#76# (call) -sets if target phone number when you call should be displayed (works only in some networks)

*#77# (call) -(work s only in some networks)

*#33/35# (call -displays message "Service not active".

**31# (call) -your no. will not be showed to others when you make a call



3210


*#06# -IMEI

*#0000# -software version

*#92702689# (or *#war0anty#)- enters service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.


#3370# -Turns off sound encoding system Enhanced Full Rate .

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.

xx# -Replace xx with desired phonebook entry - press # and you will see it on display.


51XX


*#06# -IMEI

*#0000# - Software version

*#92702689#( or *#war0anty#) Enter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.

#pw+1234567890+1 -provider lock status

#pw+1234567890+2 -Network lock status

#pw+1234567890+3 -Provider lock status

#pw+1234567890+4 - SimCard lock status


NOKIA 61XX


*#06# -IMEI

*#0000# ;-*#99 99# (Nokia 6130)


*#92702689# (or *#war0anty#) Software versionEnter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.


NOKIA8810


*#06# - IMEI

*#0000# -Software version

*#92702689# (or *#war0anty#) Enter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy

#4720# -Turns off battery save mode - saves about 30 % of energy



NOKIA99OO


*#06# -IMEI

*#682371158412125# -Software version

*#3283# -Displays week and year of manufacture, ie. 1497 means 14th week of 1997.



NOKIA 911O


*#06# IMEI


*#0000# SOFTWARE VERSION

*3370# Turns on sound encoding system - Enhanced Full Rate.

#3370# Turns off sound encoding system - Enhanced Full Rate.

*4720# Turns on battery save mode - saves about 30 % of energy.

#4720# Turns off battery save mode.



NOKIA 81XX


*#06# IMEI
*#8110# Software version
xx# Replace xx with desired phonebook entry - press # and you will see it on display

*#92702689# (or *#warOanty#)

"Warranty code:" - you have to enter one of the following codes:

9268 (OK) displays IMEI (International Mobile Equipment Identification)

6232 (OK) displays date of manufacture in format MMYY (MM - month, RR - year)


7832 (OK) displays date of purchase

7332 (OK) displays date of repair or upgrade

37832 (OK) sets date of purchase in format MMYY (MM - month, RR - year) - attention: you can set it only once, so beware !!!

87267 (OK) transmits user data/move data do service PC

 

Siemens Mobile Secret Codes:

C25:

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button

Pin Out (electrical connections)

1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO

Languages:

*#0000#+green phone - choose automaticaly
*#0001#+green phone - English
*#0030#+green phone - Greek
*#0031#+green phone - Netherlands
*#0032#+green phone - French
*#0034#+green phone - Spanish
*#0039#+green phone - Italian
*#0049#+green phone - German
*#0090#+green phone - Turkish

 

How to change PIN

**04*old PIN*new PIN*new PIN#

How to check simlock status

*#0606# and then press left soft-key, you will see strange characters, then text ("brak blokad"). If you see for example 260-02, it means the phone is locked to Era GSM. In older models you can use *#06# and see the same information after clicking on left key (you will see IMEI and software version).


S4:

 

Monitor Mode - how to activate

Press left soft-key, then 9 (SET UP) 8 (Phone Status). You will see IMEI number, then press left soft-key and in order 7684666 and red phone at the end (monitor mode has been activated). To read information from Monitor Mode - press left soft-key, then 5 (GSM SERVICE) and 6 (Monitor). Monitor mode turns off when you switch off the phone. You must activate it again if you want.

 

How to see date of software

Press left soft-key, then 9 (SET UP) 8 (Phone status). You will see IMEI number, then press twice left soft-key, 98, left soft-key, 7684666, red phone (activates Monitor Mode), left soft-key, 56 (turns on Monitor Mode), left soft-key, 98, left soft-key, 7684666, hang up (red phone) >abck to "normal" and then left soft-key, 56.

S6, S8:

If you add to phonebook under 'own phone number' +12022243121 with namez (for example MMI), then you will see something smile.gif

S10, E10:

In phonebook enter +12022243121 as your own phone no. You will see a picture with sun, two palms and greetings.

S15e:

Monitor Mode:

Code: *#7436267*8378# (*#SIEMENS*TEST#)
Hold red phone button until it code disapears.
Menu 3.3.4 Choose frequency.
Menu 3.3.4.1 Automaticaly.
Menu 3.3.4.2 Choose GSM-900
Menu 3.3.4.3 Choose GSM-1800

Menu 10.1 MS info
Menu 10.2 Soft date
Menu 10.2.1 Software version.
Menu 10.2.2 EEProm version.
Menu 10.3 Tst and product info.
Menu 10.3.1 Handware data.
Menu 10.3.2 Date of manufacture
Menu 10.3.3 Service date
Menu 10.3.4 Date of repair.


S25:

Enhanced Full Rate
*#3370# turns on
#3370# turns off

Haft Rate Mode
*#4720# turns on
#4720# turns off.

 

Languages

*#0000#+green phone - choose automaticaly
*#0001#+green phone - English
*#0030#+green phone - Greek
*#0031#+green phone - Netherlands
*#0032#+green phone - French
*#0034#+green phone - Spanish
*#0039#+green phone - Italian
*#0049#+green phone - German
*#0090#+green phone - Turkish

 

How to change PIN2?

**04*old PIN2*new PIN2*new PIN2#

What is my software version?

Menu 8-8-2 press left-softkey when you see IMEI number, or *#06# and then green phone button and then press left soft-key.

 

How to extend battery life

IrDA - turn on only when you need.
Turn off automatic network search (6-3)Turn off Vibration alarm.

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button



S25, M35, S35, C35

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button

Motorola Codes:

Motorola 920

Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.


The 54# Tip:

Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.


Motorola 930

Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.


Motorola 930

The 54# Tip:

Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.


Motorola 6200

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

UK (Orange)
AU

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered left to right, keypad up, battery down

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector


Motorola 7500

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

IT (model: F16 HW: 5.2 SW: 2.1)


What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs
Numbered right to left, keypad up, battery down looking

1. Gnd
2. Pos
3. True data (TD) (input)
4. Complimentary data (CD) (input)
5. Return data (RD) (output)
6. Audio gnd
7. Audio out
8. Audioin

Motorola 8200

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

ES, AU, NL, BE


What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered right to left, keypad up, battery down looking

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector


Motorola 8400

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

ES, AU, NL, BE


What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered right to left, keypad up, battery down looking

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector


Motorola 8700

*#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

AU, IT, SG, DE, ES, ZA

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.


Motorola CD 160

Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.


Motorola CD 520

Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.


Motorola d460

#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.


Motorola V3688

#06# for checking the IMEI (International Mobile Equipment Identity)

Enhanced Full Rate Codec (EFR):

To Enable EFR press [][][] 119 [] 1 [] OK.
To Disable EFR press [][][] 119 [] 0 [] OK

NOTE: Nothing appears on Screen.

Ericsson Mobile Secret Codes

T10

*#06# for checking the IMEI (International Mobile Equipment Identity)

>*<<*<* for checking the firmware revision information (software release)

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.

Access menu without Sim card

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again. And this will not care about Phone lock!

A way to (un)lock your cell phone on to the network(subset):
1. Press <**<
2. Then on the display appear and give you two choices: Lock to Network ? and Lock to Network subset? (Use arrow keys to select)
3. Enter the NCK number (code is provided by the SP)
4. You have 5 attemps to do this
5. Then your cell phone will work 'only' with the network

Warning: The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. To activate/deactivate this lock one needs a special secret code that is not available to the end user. Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Message Report

When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.

T18

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

To access SIM-Locking menu of your phone, press: < * [CLR] <
Be careful or you may lock your phone.

Message Report

When you writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.

T28

*#06# for checking the IMEI (International Mobile Equipment Identity)

>*<<*<* for checking the firmware revision information (software release)

>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

The Service Provider (SP) Lock

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:

<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.

<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.

Message Report

When you are writing a message, place at the start of it the code *0# and continue with your message. It's job is like nokias report. It gives you information about the sended message.


388

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# to reset the phones menu-language to English.

>*<<*<* for checking the firmware revision information (software release)

>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)

<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.

<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu...

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.

Access menu without Sim card ...

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?,Mail, Phone book. NOTE if you try this on the GH688 your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again.

GA628

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#0000# to reset the phones menu-language to English.

*#103# then YES Time and date will be shown.

>*<<*<* for checking the firmware revision information (software release)

>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)

The Service Provider (SP) Lock

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:

<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.

<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times,the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.

Bat. level indicator when turned OFF

When the phone is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.

Access menu without Sim card

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?,Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again.

Alarm Clock Menu

Go to MissedCall Empty the list Press the -> key for a second or two The option Menu size turns up Choose 'yes' and go from there.

An alarm clock turned up too but it never rang. I think this was because there is no clock in the phone.

Free phone calls using the GA628

This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions.
The prepaid GSM SIM CARD is a kind of "SIM card" which only has a sertant amount of credit on it (like a normal phonebox telecard)... if it can be traced? - we don't know...

Well..here's the trick you dial the no. normally and press YES. While "connecting" is shown on the screen, the following procedure should be carried out: Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone. You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE phone calls in some countries.. we hope!!

Another variant of the code

Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.

If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...???

How to Bypass BIOS Passwords

Anwar Shaik

Web Designer at Wildwoods Adventure Tourism Pvt Ltd.

Khairatabad,
Hyderabad,
India.   
Email : anwarbhashas@gmail.com

How to Bypass BIOS Passwords

BIOS passwords can add an extra layer of security for desktop and laptop computers. They are used to either prevent a user from changing the BIOS settings or to prevent the PC from booting without a password. Unfortunately, BIOS passwords can also be a liability if a user forgets their password, or changes the password to intentionally lock out the corporate IT department. Sending the unit back to the manufacturer to have the BIOS reset can be expensive and is usually not covered in the warranty. Never fear, all is not lost. There are a few known backdoors and other tricks of the trade that can be used to bypass or reset the BIOS

DISCLAIMER

This article is intended for IT Professionals and systems administrators with experience servicing computer hardware. It is not intended for home users, hackers, or computer thieves attempting to crack the password on a stolen PC. Please do not attempt any of these procedures if you are unfamiliar with computer hardware, and please use this information responsibly. LabMice.net is not responsible for the use or misuse of this material, including loss of data, damage to hardware, or personal injury.


Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot (or will not) help you, there are a number of methods that can be used to bypass or reset the BIOS password yourself. They include:

Using a manufacturers backdoor password to access the BIOS

Use password cracking software

Reset the CMOS using the jumpers or solder beads.

Removing the CMOS battery for at least 10 minutes

Overloading the keyboard buffer

Using a professional service

Please remember that most BIOS passwords do not protect the hard drive, so if you need to recover the data, simply remove the hard drive and install it in an identical system, or configure it as a slave drive in an existing system. The exception to this are laptops, especially IBM Thinkpads, which silently lock the hard drive if the supervisor password is enabled. If the supervisor password is reset without resetting the and hard drive as well, you will be unable to access the data on the drive.

Backdoor passwords

Many BIOS manufacturers have provided backdoor passwords that can be used to access the BIOS setup in the event you have lost your password. These passwords are case sensitive, so you may wish to try a variety of combinations. Keep in mind that the key associated to "_" in the US keyboard corresponds to "?" in some European keyboards. Laptops typically have better BIOS security than desktop systems, and we are not aware of any backdoor passwords that will work with name brand laptops.

WARNING: Some BIOS configurations will lock you out of the system completely if you type in an incorrect password more than 3 times. Read your manufacturers documentation for the BIOS setting before you begin typing in passwords

Award BIOS backdoor passwords:

ALFAROME ALLy aLLy aLLY ALLY aPAf _award AWARD_SW AWARD?SW AWARD SW AWARD PW AWKWARD awkward BIOSTAR CONCAT CONDO Condo d8on djonet HLT J64 J256 J262 j332 j322 KDD Lkwpeter LKWPETER PINT pint SER SKY_FOX SYXZ syxz shift + syxz TTPTHA ZAAADA ZBAAACA ZJAAADC 01322222
589589 589721 595595 598598

AMI BIOS backdoor passwords:

AMI AAAMMMIII BIOS PASSWORD HEWITT RAND AMI?SW AMI_SW LKWPETER A.M.I. CONDO

PHOENIX BIOS backdoor passwords:

phoenix, PHOENIX, CMOS, BIOS

MISC. COMMON PASSWORDS

ALFAROME BIOSTAR biostar biosstar CMOS cmos LKWPETER lkwpeter setup SETUP Syxz Wodj

OTHER BIOS PASSWORDS BY MANUFACTURER

Manufacturer Password
VOBIS & IBM merlin
Dell Dell
Biostar Biostar
Compaq Compaq
Enox xo11nE
Epox central
Freetech Posterie
IWill iwill
Jetway spooml
Packard Bell bell9
QDI QDI
Siemens SKY_FOX
TMC BIGO
Toshiba Toshiba

TOSHIBA BIOS

Most Toshiba laptops and some desktop systems will bypass the BIOS password if the left shift key is held down during boot

IBM APTIVA BIOS

Press both mouse buttons repeatedly during the boot

Password cracking software

The following software can be used to either crack or reset the BIOS on many chipsets. If your PC is locked with a BIOS administrator password that will not allow access to the floppy drive, these utilities may not work. Also, since these utilities do not come from the manufacturer, use them cautiously and at your own risk.

Cmos password recovery tools 3.1
!BIOS (get the how-to article)
RemPass
KILLCMOS

Using the Motherboard "Clear CMOS" Jumper or Dipswitch settings

Many motherboards feature a set of jumpers or dipswitches that will clear the CMOS and wipe all of the custom settings including BIOS passwords. The locations of these jumpers / dipswitches will vary depending on the motherboard manufacturer and ideally you should always refer to the motherboard or computer manufacturers documentation. If the documentation is unavailable, the jumpers/dipswitches can sometimes be found along the edge of the motherboard, next to the CMOS battery, or near the processor. Some manufacturers may label the jumper / dipswitch CLEAR - CLEAR CMOS - CLR - CLRPWD - PASSWD - PASSWORD - PWD. On laptop computers, the dipswitches are usually found under the keyboard or within a compartment at the bottom of the laptop.
Please remember to unplug your PC and use a grounding strip before reaching into your PC and touching the motherboard. Once you locate and rest the jumper switches, turn the computer on and check if the password has been cleared. If it has, turn the computer off and return the jumpers or dipswitches to its original position.

Removing the CMOS Battery

The CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the CMOS may reset itself and the password should be blank. (Along with any other machine specific settings, so be sure you are familiar with manually reconfiguring the BIOS settings before you do this.) Some manufacturers backup the power to the CMOS chipset by using a capacitor, so if your first attempt fails, leave the battery out (with the system unplugged) for at least 24 hours. Some batteries are actually soldered onto the motherboard making this task more difficult. Unsoldering the battery incorrectly may damage your motherboard and other components, so please don't attempt this if you are inexperienced. Another option may be to remove the CMOS chip from the motherboard for a period of time.
Note: Removing the battery to reset the CMOS will not work for all PC's, and almost all of the newer laptops store their BIOS passwords in a manner which does not require continuous power, so removing the CMOS battery may not work at all. IBM Thinkpad laptops lock the hard drive as well as the BIOS when the supervisor password is set. If you reset the BIOS password, but cannot reset the hard drive password, you may not be able to access the drive and it will remain locked, even if you place it in a new laptop. IBM Thinkpads have special jumper switches on the motherboard, and these should be used to reset the system.

Overloading the KeyBoard Buffer

On some older computer systems, you can force the CMOS to enter its setup screen on boot by overloading the keyboard buffer. This can be done by booting with the keyboard or mouse unattached to the systems, or on some systems by hitting the ESC key over 100 times in rapid succession.

Jumping the Solder Beads on the CMOS

It is also possible to reset the CMOS by connecting or "jumping" specific solder beads on the chipset. There are too many chipsets to do a breakdown of which points to jump on individual chipsets, and the location of these solder beads can vary by manufacturer, so please check your computer and motherboard documentation for details. This technique is not recommended for the inexperienced and should be only be used as a "last ditch" effort.

Using a professional service

If the manufacturer of the laptop or desktop PC can't or won't reset the BIOS password, you still have the option of using a professional service. Password Crackers, Inc., offers a variety of services for desktop and laptop computers for between $100 and $400. For most of these services, you'll need to provide some type of legitimate proof of ownership. This may be difficult if you've acquired the computer second hand or from an online auction.

Windows Shortcuts

Anwar Shaik

Web Designer at Wildwoods Adventure Tourism Pvt Ltd.

Khairatabad,
Hyderabad,
India.   
Email : anwarbhashas@gmail.com

Run Commands:

Quote:

compmgmt.msc  : Computer management

devmgmt.msc     : Device manager

diskmgmt.msc    : Disk management

dfrg.msc             : Disk defrag

eventvwr.msc     : Event viewer

fsmgmt.msc        : Shared folders

gpedit.msc          : Group policies

lusrmgr.msc        : Local users and groups

perfmon.msc      : Performance monitor

rsop.msc            : Resultant set of policies

secpol.msc         : Local security settings

services.msc       : Various Services

msconfig             : System Configuration Utility

regedit                : Registry Editor

msinfo32             : System Information

sysedit                : System Edit

win.ini                 : windows loading information(also system.ini)

winver                : Shows current version of windows

mailto:                : Opens default email client

command            : Opens command prompt

Run Commands to access the control panel:

Quote:

Add/Remove Programs control    :  appwiz.cpl

Date/Time Properties control        :  timedate.cpl

Display Properties control            :  desk.cpl

FindFast control                          :  findfast.cpl

Fonts Folder control                    :   fonts

Internet Properties control           :  inetcpl.cpl

Keyboard Properties control       :  main.cpl keyboard

Mouse Properties control            :  main.cpl

Multimedia Properties control      :   mmsys.cpl

Network Properties control         :   netcpl.cpl

Password Properties control        :    password.cpl

Printers Folder control                 :    printers

Sound Properties control             :    mmsys.cpl sounds

System Properties control            :     sysdm.cpl

Command Prompt

Quote:

ANSI.SYS Defines functions that change display graphics, control cursor movement, and reassign keys.
APPEND Causes MS-DOS to look in other directories when editing a file or running a command.
ARP Displays, adds, and removes arp information from network devices.
ASSIGN Assign a drive letter to an alternate letter.
ASSOC View the file associations.
AT Schedule a time to execute commands or programs.
ATMADM Lists connections and addresses seen by Windows ATM call manager.
ATTRIB Display and change file attributes.
BATCH Recovery console command that executes a series of commands in a file.
BOOTCFG Recovery console command that allows a user to view, modify, and rebuild the boot.ini
BREAK Enable / disable CTRL + C feature.
CACLS View and modify file ACL's.
CALL Calls a batch file from another batch file.
CD Changes directories.
CHCP Supplement the International keyboard and character set information.
CHDIR Changes directories.
CHKDSK Check the hard disk drive running FAT for errors.
CHKNTFS Check the hard disk drive running NTFS for errors.
CHOICE Specify a listing of multiple options within a batch file.
CLS Clears the screen.
CMD Opens the command interpreter.
COLOR Easily change the foreground and background color of the MS-DOS window.
COMP Compares files.
COMPACT Compresses and uncompress files.
CONTROL Open control panel icons from the MS-DOS prompt.
CONVERT Convert FAT to NTFS.
COPY Copy one or more files to an alternate location.
CTTY Change the computers input/output devices.
DATE View or change the systems date.
DEBUG Debug utility to create assembly programs to modify hardware settings.
DEFRAG Re-arrange the hard disk drive to help with loading programs.
DEL Deletes one or more files.
DELETE Recovery console command that deletes a file.
DELTREE Deletes one or more files and/or directories.
DIR List the contents of one or more directory.
DISABLE Recovery console command that disables Windows system services or drivers.
DISKCOMP Compare a disk with another disk.
DISKCOPY Copy the contents of one disk and place them on another disk.
DOSKEY Command to view and execute commands that have been run in the past.
DOSSHELL A GUI to help with early MS-DOS users.
DRIVPARM Enables overwrite of original device drivers.
ECHO Displays messages and enables and disables echo.
EDIT View and edit files.
EDLIN View and edit files.
EMM386 Load extended Memory Manager.
ENABLE Recovery console command to enable a disable service or driver.
ENDLOCAL Stops the localization of the environment changes enabled by the setlocal command.
ERASE Erase files from computer.
EXIT Exit from the command interpreter.
EXPAND Expand a M*cros*ft Windows file back to it's original format.
EXTRACT Extract files from the M*cros*ft Windows cabinets.
FASTHELP Displays a listing of MS-DOS commands and information about them.
FC Compare files.
FDISK Utility used to create partitions on the hard disk drive.
FIND Search for text within a file.
FINDSTR Searches for a string of text within a file.
FIXBOOT Writes a new boot sector.
FIXMBR Writes a new boot record to a disk drive.
FOR Boolean used in batch files.
FORMAT Command to erase and prepare a disk drive.
FTP Command to connect and operate on a FTP server.
FTYPE Displays or modifies file types used in file extension associations.
GOTO Moves a batch file to a specific label or location.
GRAFTABL Show extended characters in graphics mode.
HELP Display a listing of commands and brief explanation.
IF Allows for batch files to perform conditional processing.
IFSHLP.SYS 32-bit file manager.
IPCONFIG Network command to view network adapter settings and assigned values.
KEYB Change layout of keyboard.
LABEL Change the label of a disk drive.
LH Load a device driver in to high memory.
LISTSVC Recovery console command that displays the services and drivers.
LOADFIX Load a program above the first 64k.
LOADHIGH Load a device driver in to high memory.
LOCK Lock the hard disk drive.
LOGON Recovery console command to list installations and enable administrator login.
MAP Displays the device name of a drive.
MD Command to create a new directory.
MEM Display memory on system.
MKDIR Command to create a new directory.
MODE Modify the port or display settings.
MORE Display one page at a time.
MOVE Move one or more files from one directory to another directory.
MSAV Early M*cros*ft Virus scanner.
MSD Diagnostics utility.
MSCDEX Utility used to load and provide access to the CD-ROM.
NBTSTAT Displays protocol statistics and current TCP/IP connections using NBT
NET Update, fix, or view the network or network settings
NETSH Configure dynamic and static network information from MS-DOS.
NETSTAT Display the TCP/IP network protocol statistics and information.
NLSFUNC Load country specific information.
NSLOOKUP Look up an IP address of a domain or host on a network.
PATH View and modify the computers path location.
PATHPING View and locate locations of network latency.
PAUSE Command used in batch files to stop the processing of a command.
PING Test / send information to another network computer or network device.
POPD Changes to the directory or network path stored by the pushd command.
POWER Conserve power with computer portables.
PRINT Prints data to a printer port.
PROMPT View and change the MS-DOS prompt.
PUSHD Stores a directory or network path in memory so it can be returned to at any time.
QBASIC Open the QBasic.
RD Removes an empty directory.
REN Renames a file or directory.
RENAME Renames a file or directory.
RMDIR Removes an empty directory.
ROUTE View and configure windows network route tables.
RUNAS Enables a user to execute a program on another computer.
SCANDISK Run the scandisk utility.
SCANREG Scan registry and recover registry from errors.
SET Change one variable or string to another.
SETLOCAL Enables local environments to be changed without affecting anything else.
SETVER Change MS-DOS version to trick older MS-DOS programs.
SHARE Installs support for file sharing and locking capabilities.
SHIFT Changes the position of replaceable parameters in a batch program.
SHUTDOWN Shutdown the computer from the MS-DOS prompt.
SMARTDRV Create a disk cache in conventional memory or extended memory.
SORT Sorts the input and displays the output to the screen.
START Start a separate window in Windows from the MS-DOS prompt.
SUBST Substitute a folder on your computer for another drive letter.
SWITCHES Remove add functions from MS-DOS.
SYS Transfer system files to disk drive.
TELNET Telnet to another computer / device from the prompt.
TIME View or modify the system time.
TITLE Change the title of their MS-DOS window.
TRACERT Visually view a network packets route across a network.
TREE View a visual tree of the hard disk drive.
TYPE Display the contents of a file.
UNDELETE Undelete a file that has been deleted.
UNFORMAT Unformat a hard disk drive.
UNLOCK Unlock a disk drive.
VER Display the version information.
VERIFY Enables or disables the feature to determine if files have been written properly.
VOL Displays the volume information about the designated drive.
XCOPY Copy multiple files, directories, and/or drives from one location to another.
TRUENAME When placed before a file, will display the whole directory in which it exists
TASKKILL It allows you to kill those unneeded or locked up applications

Windows XP Shortcuts:

Quote:

ALT+- (ALT+hyphen) Displays the Multiple Document Interface (MDI) child window's System menu
ALT+ENTER View properties for the selected item
ALT+ESC Cycle through items in the order they were opened
ALT+F4 Close the active item, or quit the active program
ALT+SPACEBAR Display the System menu for the active window
ALT+TAB Switch between open items
ALT+Underlined letter Display the corresponding menu
BACKSPACE View the folder one level up in My Computer or Windows Explorer
CTRL+A Select all
CTRL+B Bold
CTRL+C Copy
CTRL+I Italics
CTRL+O Open an item
CTRL+U Underline
CTRL+V Paste
CTRL+X Cut
CTRL+Z Undo
CTRL+F4 Close the active document
CTRL while dragging Copy selected item
CTRL+SHIFT while dragging Create shortcut to selected iteM
CTRL+RIGHT ARROW Move the insertion point to the beginning of the next word
CTRL+LEFT ARROW Move the insertion point to the beginning of the previous word
CTRL+DOWN ARROW Move the insertion point to the beginning of the next paragraph
CTRL+UP ARROW Move the insertion point to the beginning of the previous paragraph
SHIFT+DELETE Delete selected item permanently without placing the item in the Recycle Bin
ESC Cancel the current task
F1 Displays Help
F2 Rename selected item
F3 Search for a file or folder
F4 Display the Address bar list in My Computer or Windows Explorer
F5 Refresh the active window
F6 Cycle through screen elements in a window or on the desktop
F10 Activate the menu bar in the active program
SHIFT+F10 Display the shortcut menu for the selected item
CTRL+ESC Display the Start menu
SHIFT+CTRL+ESC Launches Task Manager
SHIFT when you insert a CD Prevent the CD from automatically playing
WIN Display or hide the Start menu
WIN+BREAK Display the System Properties dialog box
WIN+D Minimizes all Windows and shows the Desktop
WIN+E Open Windows Explorer
WIN+F Search for a file or folder
WIN+F+CTRL Search for computers
WIN+L Locks the desktop
WIN+M Minimize or restore all windows
WIN+R Open the Run dialog box
WIN+TAB Switch between open items

Windows Explorer Shortcuts:

Quote:

ALT+SPACEBAR - Display the current window’s system menu
SHIFT+F10 - Display the item's context menu
CTRL+ESC - Display the Start menu
ALT+TAB - Switch to the window you last used
ALT+F4 - Close the current window or quit
CTRL+A - Select all items
CTRL+X - Cut selected item(s)
CTRL+C - Copy selected item(s)
CTRL+V - Paste item(s)
CTRL+Z - Undo last action
CTRL+(+) - Automatically resize the columns in the right hand pane
TAB - Move forward through options
ALT+RIGHT ARROW - Move forward to a previous view
ALT+LEFT ARROW - Move backward to a previous view
SHIFT+DELETE - Delete an item immediately
BACKSPACE - View the folder one level up
ALT+ENTER - View an item’s properties
F10 - Activate the menu bar in programs
F6 - Switch between left and right panes
F5 - Refresh window contents
F3 - Display Find application
F2 - Rename selected item

Internet Explorer Shortcuts:

Quote:

CTRL+A - Select all items on the current page
CTRL+D - Add the current page to your Favorites
CTRL+E - Open the Search bar
CTRL+F - Find on this page
CTRL+H - Open the History bar
CTRL+I - Open the Favorites bar
CTRL+N - Open a new window
CTRL+O - Go to a new location
CTRL+P - Print the current page or active frame
CTRL+S - Save the current page
CTRL+W - Close current browser window
CTRL+ENTER - Adds the http://www. (url) .com
SHIFT+CLICK - Open link in new window
BACKSPACE - Go to the previous page
ALT+HOME - Go to your Home page
HOME - Move to the beginning of a document
TAB - Move forward through items on a page
END - Move to the end of a document
ESC - Stop downloading a page
F11 - Toggle full-screen view
F5 - Refresh the current page
F4 - Display list of typed addresses
F6 - Change Address bar and page focus
ALT+RIGHT ARROW - Go to the next page
SHIFT+CTRL+TAB - Move back between frames
SHIFT+F10 - Display a shortcut menu for a link
SHIFT+TAB - Move back through the items on a page
CTRL+TAB - Move forward between frames
CTRL+C - Copy selected items to the clipboard
CTRL+V - Insert contents of the clipboard
ENTER - Activate a selected link
HOME - Move to the beginning of a document
END - Move to the end of a document
F1 - Display Internet Explorer Help

WinRar Tutorial Compression profiles, passwords and more

Anwar Shaik

Web Designer at Wildwoods Adventure Tourism Pvt Ltd.

Khairatabad,
Hyderabad,
India.   
Email : anwarbhashas@gmail.com

WinRar Tutorial Compression profiles, passwords and more

 FIRST - Set Yer options correctly


Open WInRar

OPTIONS | SETTINGS | COMPRESSSION | CREATE DEFAULT

GENERAL | (ok now that we're there, here's what U do next)

But 1st -> realize that everything U set on the default profile will occur everytime U rar files. So if U only need a password occasionally, or other special settings, then create another profile for those purposes. U can change which profile U need to use when WinRar is open. The Default profile is used otherwise, such as when using WinRar from the context menus in explorer.



General tab:

Archive format RAR

Compression method BEST

size (enter in BYTES the size you want as the max single Rar file). I use 51,200,000 (50,000 KB x 1024). But chose yer max size as U wish.

Update method ADD AND REPLACE FILES

Archiving options: check > PUT RECOVERY RECORD

Archiving options: check > TEST ARCHIVED FILES.

Archiving options: check > DELETE FILES AFTER ARCHIVING ( unless U want yer HDD to fill up with the rars & the original files for some reason)

Archiving options: do NOT check > Put authenticy verification, as this can be a source of Error Messages being generated upon extraction.

Archiving options: check > Create SFX ONLY if U don't expect the person getting the filez to have WinRar. Otherwise leave it UNCHECKED.

Archiving options: do NOT check > Create Solid Archive. This can cause problems in certain cases.

Archiving options: do NOT check > Lock Arhive. This has NOTHING to do with a password.




Advanced tab:


Recovery Record -> U can leave it at 1%. Only set it higher if U expect the rar files to have a high risk of corruption. (very bad internet connections, or use on floppy disks, etc)

All else can be left alone. Don't bother with the Compression button.


Files Tab


File Paths -> STORE RELATIVE PATHS. (unless U have a specific folder U want the files to be extracted to. Such as c:\program files\No Name Appz\link catcher).

The rest leave alone


Backup Tab


No need to change anything.


Time Tab


Files to Process -> OF ANY TIME


Comment Tab


Whatever comment U enter there will be shown on the right hand pane when WinRar opens yer Rar files. Think of something fun, catchy,interesting. I always mention that the files have recovery record set, so if they are corrupted in transfer, the person knows to use REPAIR function.


Click OK, U have now created yer default profile.

HOW TO CREATE a PASSWORDED PROFILE, which will NOT be the default

Open WInRar

Click the ADD Icon

ADVANCED | Push the SET PASSWORD Button

Check the SHOW PASSWORD box, so U can see what U typed and also copy/paste it to wherever U need it, such as on yer post. Now only one box will be open to enter the password. COPY/PASTE it to a txt file. I call mine WinRAR_Password.txt. Do this IMMEDIATELY afer entering it, before closing that window, or U may be very sorry later.

Enter the password. It is CASE SENSITIVE. If the password is 8 or more alpha-numeric characters, no one will be able to hack it. Unless they own a super-computer. Avoid using words that are found in dictionaries.

Check the encrypt file names box. That way, even if some nasty person obtains yer Rar file, they won't know what is in it, especially if the name U give the rar file is "Grandma_pix.rar" or whatever.

Back to GENERAL tab | PROFILES button | Save Current Settings to a New Profile

Enter the name of this profile. For example if the passwd is ht*p://www.superforum.com, U might name the profile Superforum. Only U will see this profile name. It does not go into the rar files made from it.

Do NOTHING more, do NOT set this as default profile.

Click OK | Click OK again.

Now U have a Passworded Profile.

HOW TO USE the PASSWORD PROFILE

Note :  Everything U set on the default profile will occur everytime U rar files. So when U need the password profile, follow these instructions. The Default profile is used otherwise, such as when using WinRar from the contest menus in explorer.


Open WinRar

Browse to the filez/folderz U want to Rar with Password.

Highlight all filez/folderz to be included.

Press the ADD button.

GENERAL tab | PROFILES button

Scoll down to the profile whcih has the password set. In my example Superforum

Click OK

The filez are Rar'd. U can check if U did all correctly by opening the rar filez, and seeing if a password is required.

Until U change back to DEFAULT profile in this same method, or close WinRar, all Rar'z U create after this will have a password.

HOW TO REPAIR A CORRUPTED RAR FILE

With Win Explorer create a sub folder REPAIRED

Open WinRar, browse to the folder with the damaged Rar file(z). U can find which one is bad by selecting the 1st RAR file and using TEST button.

Select the damaged file, press REPAIR button.

In dialogue box, enter the path to the REPAIR subfolder, or browse to it.

As long as there is a RECOVERY record in that Rar, it will be repaired.

Copy all the NON-DAMAGED rars to your repair folder and rename the REPAIRED file back to it's original name.

Proceed with extraction in the REPAIR folder as normal.

MISC TIPS

If U select a folder to Rar, later when U extract it inside that folder, U end up with nested folders of same name. (We've all seen this often when extracting rars.

So Instead, go inside the folder, select all the filez & sub-folderz. Now U have a rar inside just one folder.